End-User Reference Guide; Backlight Options; Change Backlight Settings (All Except Ip5131); Change Ip5131 Backlight Settings - Toshiba IPedge IP5000 Series Installation Instructions Manual

END-USER REFERENCE GUIDE

END-USER REFERENCE
GUIDE

Backlight Options

Change Backlight
Settings (all except
IP5131)
Change IP5131 Backlight
Settings

Brightness Control

IPT Installation Manual Feb,, 2015
Available on IP5000-series, except IP5022-SD, telephones and LM
models. This setting adjusts when the backlight comes on and how long it
stays lit.
1. Press Hold+3+6+9 (simultaneously).
2. Press the Mic button.
3. Press Hold.
4. Use the Soft Keys to set the backlight from dim to bright.
5. Press FB1, the display will LCD Backlight Setting. Press and hold:
1 for Always off
2 for Always on
3 for On Demand.
6. Press FB2 to set the On Demand timer. The display will show
Backlight Timer x10 sec. Press a dial pad button to select the
backlight on time (e.g. 3 = 30 seconds). The timer range is 1 (10
seconds) to 30 (300 seconds).
7. Press Hold to save the settings.
1. Press Hold+3+6+9 (simultaneously).
2. Press the Others soft button.
3. Use the Soft Keys to select: BL Mode.
4. Press a softkey to select:
Always Off
Always On
On Demand
5. Press the Set softkey then, press it again.
6. Press the BL Timer softkey.
7. Use the dial pad to enter a value 1 (10 seconds) to 30 (300 seconds).
8. Press the Set softkey then, press it again.
Available on IP5000-series, except IP5022-SD, telephones and the
LM5110 ADM. Refer to the next section for IP5131 procedures.
Change the LCD back light brightness on the IP5100-models (except
IP5131 and IP5022-SD) and the LM5110 ADM:
1. Press Hold+3+6+9 (simultaneously).
Bright
2. Press softkey on the telephone to increase brightness. On the
Bright
LM5110 use the
Dim
3. Press softkey to decrease brightness. On the LM5110 use the
Dim
softkey.
4. Lift the handset off-hook / on-hook to save the settings.
softkey.
Backlight Options
1-13