Toshiba IPedge IP5000 Series Installation Instructions Manual page 54

4-2
then,
Getting Server Address
This indicates that the IPT is not programmed into a VIPedge database.
This process will take about 10 ~ 20 seconds.
Getting Server Address
Serial# not register
The IPT will change to on-premise mode then, restart.
Set to onpremise mode
And restart...
After the initialize the IPT starts looking for an IPedge server.
IP Address Setting
When an IPedge server is found the IPT will prompt you for a DN.
Enter DN:
Enter Bksp
Enter the DN then press the Enter softkey.
Enter DN: 2101
Enter Bksp
If that DN is found on the IPedge server database the IPT will initialize.
Restart...
Cncl
Cncl
IPT Installation Manual July, 2013