Toshiba IPedge IP5000 Series Installation Instructions Manual page 50

KEY ASSIGNMENTS
Ring Down
IPT Data
Station IP Address Type
Station IP Address
Auto Assign Station ID
Station Terminal
Authentication Mode
2-10
If this is to be a Ring Down station set Emergency Ring Down to Enabled.
Set the Emergency Ring Down Timer to the number of seconds to wait
before the IPT station rings down to the Emergency Ring Down
Destination.
Enter the DN (up to five digits) of the station in this node that this station
will call when the timer expires.
This section sets up the network parameters for a DN.
Assign Fix for a fixed IP address. Assign Any for DHCP operation.
If the Station IP Address is set to Fix, enter the IP Address of the station.
The possible values are: Permitted, Not Permitted or Don't Care (Default).
Use Automatic when the IP telephone has no Station ID. Use Not
Automatic when IP telephone has station ID in the IP telephone setting. In
System > System IP Data, Automatic Assignment of Station ID is the
same parameter for system.
When "Don't Care" is set, System > System IP Data, Automatic
Assignment of Station ID precedes in Station > Station Assignment, IPT
Data tab, Auto Assign Station ID (this parameter).
Enabling System > System IP Data, Automatic Assignment of Station ID
is equal to using 'permitted' in Station > Station Assignment, IPT Data
tab, Auto Assign Station ID.
Disabling in System > System IP Data, Automatic Assignment of Station
ID is equal to using "Not Permitted" in Station > Station Assignment |
IPT Data tab, Auto Assign Station ID. When the IP telephone requests to
connect to an IPedge system with no station ID, the IPedge searches for
a PDN that is set in this parameter to permitted and sends the PDN to the
IP telephone. The IP telephone records it in the IP telephone setting.
Set to Apply to reserve a PDN for the IP Telephone now connected.
When Apply is set, terminal authentication by MAC address of IPT is
valid. If other IPT with the same PDN is connected to the network, the
IPedge system will reject the registration because the MAC address of
the new IPT is different.
When set to Do not Apply you can move the PDN from a IPT to another
IPT and another IPT can be connected to the IPedge server.
When Do Not Care is set, terminal authentication for this telephone is
determined by System, System IP Data, Terminal Authentication.
IPT Installation Manual July, 2013
Ring Down