Connecting; Ipedge; Vipedge - Toshiba IPedge IP5000 Series Installation Instructions Manual

CONNECTING

CONNECTING

IPedge

VIPedge

1-12
The next step in connecting the IPT to your IPedge or VIPedge system is
to program the stations into the system database. Refer to
Programming in this manual.
After the stations are entered in the database the connection process is
rather straightforward.
Note: VIPedge systems must have the IP Telephone serial
numbers entered in the portal for the customer's system
before the stations can connect. Please refer to the VIPedge
Administration manual.
This process works with new, 'out of the box' IPTs. If the IPT has been
connected to another system reset the telephone to defaultt. Refer to
RESET IPT TO DEFAULT.
1. Plug the IPT into the LAN.
2. The IPT will initialize then look for a VIPedge or IPedge system.
3. The IPT will not find a VIPedge system and display an error message.
4. After the error message the IPT will initialize and look for an IPedge
system. If there are more than one IPedge system on the net the IPT
will try each server until it connects.
5. When the IPT connects to an IPedge server it will ask for the DN of
the station.
6. If the DN you enter is not in the IPedge database the IPT will look for
another IPedge server. The IPT display will not change during this
process.
7. If the DN you enter is in the database the IPT will again initialize then,
display the configuration saved in the database.
This process works with new, 'out of the box' IPTs. If the IPT has been
connected to another system reset the telephone to default. Refer to
RESET IPT TO DEFAULT.
1. Plug the IPT into the LAN.
2. The IPT will initialize then look for a VIPedge system.
3. The IPT will connect to the VIPedge system that has the IPT serial
number.
4. When the IPT connects to an VIPedge system it will ask for the DN of
the station.
5. If the DN you enter is the VIPedge database the IPT will initialize.
6. The IPT will start up after the initialization with the configuration
programmed into the database.
Chapter 2–
IPT Installation Manual Feb,, 2015
IPedge