Toshiba IPedge IP5000 Series Installation Instructions Manual page 55

IPT Installation Manual July, 2013
The IPT will save the IP address of the IPedge server.
IP Address Setting
The IPT will register to the IPedge server.
Registering to
Primary Server
In about five to 10 seconds the IPT will change to ready. The IPT is now
ready for use.
Betty Rubble
May 20 Monday
If the DN is not found in that IPedge server the telephone will restart then
look for another IPedge server.
Depending on network activity another display may be visible as the
telephone finds then, registers to the server.
Trying Primary Server
The Server Not Found and Make Busy displays are status displays not
error messages.
Trying Primary Server
SERVER NOT FOUND
When the IPT registers with the IPedge server the phone connects in
Make Busy mode then changes to ready.
Betty Rubble
MAKE BUSY
If you see any of these displays do not touch the IP telephone. The
process will finish without intervention.
If the IP telephone is unable to locate a server to register on the screen
will display IP Address setting with no change. Allow two to three minutes
No, 2101
04:30
No, 2101
4-3