Initial Start-Up - Toshiba IPedge IP5000 Series Installation Instructions Manual

INITIAL START-UP

INITIAL START-UP
IPT Installation Manual Feb,, 2015
When an IP5000-series telephone is connected to power it will initialize
then attempt to connect to the IPedge system. The start-up sequence
indicators are described below.
1. All of the Feature Buttons (FB) will light green.
2. Next, all of the FBs will go out.
3. The FBs will light, red, in sequence, one row at a time from the
bottom of the telephone until all of the FBs are lit.
4. The FB will all light green, then go out.
5. The telephone status will be displayed on the LCD.
ADM Installation procedure:
1-11