Toshiba IPedge IP5000 Series Installation Instructions Manual page 49

Hide thumbs Also See for IPedge IP5000 Series:
Table of Contents

Advertisement

SUPPORTING ASSIGNMENTS
SUPPORTING
ASSIGNMENTS
FLEXIBLE FEATURE
ACCESS CODES
DSS
KEY ASSIGNMENTS
Copy Icon
Timer
IPT Installation Manual July, 2013
System > Class of Service
LCR/DR > DR Guide Access the Destination Restriction Wizard
LCR/DR > LCR Guide Access the Least Cost Routing Wizard
The time a call remains parked until the systems signals the parking
station - Park Recall Timer: Range 10 - 600 seconds (Default = 120
seconds)
System > Flexible Access Code
Access code #33 - Park a call in a specific orbit
Access code #32 - Retrieve a parked call
Access code #5#29 - Call Park Answer
CAUTION! It is recommended the number of stations created is set
to equal (or less than) the number of licenses provided in
the system.
IPedge systems and VIPedge solutions will allow stations to be created
beyond the limit of system licensing, up to the limit of the system capacity.
This allows the administrator to create DNs that will be used temporarily
by a pool or users, or (for IPedge systems) for purposes of survivability.
The administrator must consider the following: when stations are created
in excess of available licences, stations attempting to register with the
system may be denied based on the number of available licenses.
An IPT can support up to three DSS units (up to the system maximum).
Enter 000000 (six zeroes) as the Equipment Number for each DSS you
are assigning to this station. After the saving the DSS assignment select
the Key tab then click on the View DSS key assignment link.
The Key assignment tab is used to assign functions to the programmable
feature buttons on the IP5000 Series telephones.
Right click on a key to program that key.
Left click a key to display the programming on a key.
In the Key Assignment tab click on the Copy icon. In the dialog box click
on Select All Key. All of the keys will be highlighted. Click to deselect key
you do not want to copy. Generally you do not want to copy the PDN key.
Select the target Server and the Target Stations to which you will copy the
key assignments. Click on OK to copy the assignments.
Set the timers for this station.
Copy Icon
2-9

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IPedge IP5000 Series and is the answer not in the manual?

Table of Contents