Manually Connecting To The Server - Neopost IJ-25 User Manual

If the call fails, an error message will be displayed. You can also
connect to the Online Server manually. You can perform a generic
call, as described below, or you can perform a specific action, such
as a rate download, or usage report data upload, etc. See the
appropriate section for details.
It is strongly recommended that you leave the IJ-25 mailing
system turned on, in sleep mode, and connected to a live
analog telephone line during the night, to let the connection
to the myneopost Online Server occur automatically.

3.1 Manually Connecting to the Server

To manually connect to the server:
- Press , then use the keys scroll
M ENU
OSIRIS:
OK
- Then press
screen:
OK
- Press : the IJ-25 mailing system initializes the modem, connects
to the server, and performs any pending uploads and/or downloads.
The mailing system then disconnects and displays the following
message.
OK
- Press then
< OLS
and use the keys scroll
OLS
< GENERIC CALL >
CONNECTION DONE
GENERIC CALL OK
C
to return to READY mode.
Connections to the myneopost Online Server
or to required
>
or to required
19