Adjusting The Sharpness Of An Image (Sharpness); Adjust The Image - Sharp MX-M266N Operation Manual

ADJUSTING THE SHARPNESS OF AN IMAGE (Sharpness)

This is used to sharpen an image or make it softer.
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the
(3) Touch the [Sharpness] key.
Special Modes
Sharpness
3
Press the [START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected
4
sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key (
To cancel the sharpness setting...
Touch the [Cancel] key in the screen of step 3.
keys to switch through the screens.
(1) (2)
OK
Cancel
OK
Soft Sharp
).
Soft
Sharp

Adjust the image.

(1) Touch the [Soft] key or the [Sharp] key so
that it is highlighted.
(2) Touch the [OK] key.
You will return to the special modes screen. Touch the
[OK] key to return to the base screen of copy mode.
2-109
COPIER
Contents