Use Of Parameter Level - Siemens LMV27.100x2 Basic Documentation

26.5 Use of parameter level

VSD
F A
>1 s
Building Technologies
The parameters stored in the LMV27 can be displayed and changed on the parameter
level.
Normally, all parameters have been set by the burner manufacturer – with the exception
of those for the fuel train and for air-fuel ratio control.
A description of parameter level 400, which is used for setting the fuel train and the fuel-
air ratio curve, is given in chapter Fuel / air ratio curves – settings and commissioning.
Basic Documentation LMV27...
26 Parameter level
Press button combination
000: Int.
With , select the parameter group 100:
PArA.
With , select the parameter group 200:
PArA.
Pressing the button takes you to
/reset
parameter 201: Burner operating mode.
to display
147/219
CC1P7541en
17.12.2018