Service Level; Display Of Service Level - Siemens LMV27.100x2 Basic Documentation

25

Service level

 Note
When on the service level, you can press
parameter.
Instead of pressing

Note
Press

P
Parameter
25.1

Display of service level

P
/reset
138/219
Building Technologies
The service level is used to display information about errors including the error history
and information about the LMV27.
, you can also press
ESC
or for >3 s to return to the normal display.
/reset
V h min s %
Parameter value
Figure 80: Service level
V h min s %
No. Parameter
Service level
954 Flame intensity
960 Actual flow rate (fuel throughput in m³/h, l/h, ft³/h, gal/h)
121 Manual output
Undefined = automatic operation
922 Step position of actuators
Index: 0 = fuel
Index: 1 = air
161 Number of faults
701 Error history: 701-725.01.Code
● Error history: 701-725.02.Diagnostic code
● Error history: 701-725.03.Error class
● Error history: 701-725.04.Phase
● Error history: 701-725.05.Startup counter
● Error history: 701-725.06.Output
725 Error history: Oldest error in the history
Basic Documentation LMV27...
25 Service level
or to display the next or the previous
for <1 s.
/reset
Note!
No change of values on the service level.
If characters ._._ are displayed by the parameter, the
value may consist of more than 5 digits.
Press for >1 s and <3 s to display the value.
/reset
Press for >3 s or
/reset
of the parameter number (parameter number flashes).
Press for >3 s until SEr appears.
/reset
When releasing , you are on the service level.
/reset
ESC
to return to the selection
CC1P7541en
17.12.2018