Structure Of The Software; Overview Of The Menu Structure - DURKOPP ADLER 911-211-10 Operating Instructions Manual

5.1 Structure of the software

You can create and manage seam programs and sequences via software.
During sewing, these programs are called up and processed stitch by
stitch.
Information
Seam program:
A seam program consists of a seam contour with parameters defining the
individual contour sections.
Up to 99 seam programs can be stored in the system.
Seam programs have a file suffix of .
Seam sequence:
Up to 30 seam programs can be combined in any order to form a seam
sequence.
Up to 20 seam sequences can be stored in the system.
Seam sequences have a file suffix of .
The software is also used to define general settings that apply to all
programs. There are also technical menu items for testing and maintaining
the machine.

5.2 Overview of the menu structure

The following table provides an overview of the menu structure and the
function buttons on the start screen.
Menu items in popup menus
Menu item Function
File Open existing programs
for sewing
Create new programs
and copy or delete
existing programs.
Edit Define general settings
for all programs or
modify an existing
program.
34
fnp911
Sub-items Sub-items
Delete
Copy
Open
New Seam program
Sewing Sequence
Save As
Machine parameters
Sequence
Seam program Parameter
Contour adjustment
Testing Contour
Operating Instructions 911-211-10 - 00.0 - 10/2020
Programming
after the filename.
seq911 after the filename.
Described on
 p. 68
 p. 67
 p. 46
 p. 53
 p. 64
 p. 66
 p. 69
 p. 64
 p. 59
 p. 57
 p. 56