Table of Contents
Advertisement
Information
The remaining thread monitor (MP 1, Optional equipment) and the bobbin
counter (MP 6) can be activated simultaneously. The display shows the
two options as follows:
Fig. 50: Remaining thread monitor and bobbin counter
(1) - Display - remaining thread monitor:
74
MP6 - Counters
Symbol
Meaning
Counter type
The following options are available:
• Increment counter (Def.): The counter is incremented after each sewn
program
• Decrement counter: The counter is decremented after each sewn
program
• Increment seam sequence counter: The counter is incremented after
each seam sequence sewn
• Decrement seam sequence counter: The counter is decremented after
each seam sequence sewn
Reset value for the counter
(min. = 0 .. max. 9999; Def. 0)
Value to which the counter is set when a counter reset is performed
Adjust seam count for bobbin reserve
(min. = 0 .. max. 100; Def. 0)
A message is displayed to the user after the number of seams specified
here have been sewn. A value of 0 deactivates the function
Bobbin supply capacity
(min. = 0.0 .. max. 400.0; Def. 0.0 m)
A message is displayed to the user after the bobbin supply capacity has
been consumed. A value of 0 deactivates the function
①
Remaining thread monitor active:
R shown
Remaining thread monitor inactive:
R hidden
②
(2) - Display - bobbin counter:
Bobbin counter active: Number black
Bobbin counter inactive: Number
grayed-out
Operating Instructions 911-211-10 - 00.0 - 10/2020
Programming
Advertisement
Table of Contents
