Machine description
3
3.1 Components of the machine
Fig. 1: Components of the machine
(1) - Reel stand
(2) - Machine head
(3) - Quick-stop
(4) - Tabletop
(5) - Tabletop height adjustment
3.2 Proper use
The machine may only be used with sewing material that satisfies the
requirements of the specific application at hand.
The machine is intended only for use with dry sewing material. The sewing
material must not contain any hard objects.
The needle thicknesses permissible for the machine are listed in the
Technical data ( p. 119) chapter.
The seam must be completed with a thread that satisfies the requirements
of the specific application at hand.
The machine is intended for industrial use.
Operating Instructions 911-211-10 - 00.0 - 10/2020
Machine description
①
②
③
④
⑤
⑥
(6) - Stand
(7) - Pedal
(8) - Compressed air maintenance unit
(9) - Main switch
(10) - Control panel OP7000
⑩
⑨
⑧
⑦
13