1. Press the Save... button.
The window for entering the name of the seam program opens.
2. Enter the desired name ( p. 43) and adopt the change by pressing
The seam program is now available under this name for sewing,
Important
Always perform a contour test after creating a new seam program
( p. 56).
5.10.2 Performing a contour test
Perform a contour test every time after creating a new seam program or
editing a seam contour to ensure that the contour you entered lies within
the permissible sewing field.
To perform a contour test:
1. Press the menu items
The
Fig. 39: Performing a contour test
56
CR
OK (
).
editing or copying.
NOTICE
Property damage may occur!
If you have entered contour points that lie outside the sewing field,
the movement of the clamps during sewing can cause damage to the
machine or the sewing material.
Always perform a contour test after creating or editing a contour to
ensure that the entire contour lies within the permissible sewing field.
Contour
.
Testing Contour
Edit
>
Seam program
window appears.
Operating Instructions 911-211-10 - 00.0 - 10/2020
Programming
>
Testing