Table of Contents
Advertisement
Operation
4.3 Changing the needle
Fig. 4: Changing the needle
(1) - Hand crank
(2) - Cylinder pin
(3) - Groove
To change the needle:
1. Push the hand crank (1) down and rotate it to the left until the needle
2. Loosen threaded pin (4) (threaded pins (4) and (5) for long needles).
3. Pull the needle downwards out of the needle bar (6).
Operating Instructions 911-211-10 - 00.0 - 10/2020
WARNING
Risk of injury from sharp parts!
Puncture possible.
Switch off the machine before you change the
needle.
NOTICE
Property damage may occur!
Risk of damage to machine and thread if hook clearance is incorrect.
When switching to a different needle thickness, adjust the distance
between hook and needle.
bar (6) reaches the highest position.
①
②
(4) - Threaded pin
(5) - Threaded pin
(6) - Needle bar
⑥
⑤
④
③
17
Advertisement
Table of Contents
