Table of Contents
Advertisement
Programming
5.11 Editing machine parameters
You use the machine parameters to define the basic machine settings.
These basic settings apply to all programs.
To edit the machine parameters:
1. Press the menu items
The window for selecting the machine parameter group appears.
Fig. 48: Editing machine parameters
2. Press the desired parameter group.
The individual parameters of this group are displayed.
3. Press the desired parameter.
The window for modifying the parameter value opens.
4. Set the parameter to the desired value ( p. 44).
There are 6 machine parameter groups:
Operating Instructions 911-211-10 - 00.0 - 10/2020
Symbol
Parameter group
MP1 - Configuration
General settings
MP2 - Limit values
Limit values for speeds and positions
MP3 - Needle thread monitor
Behavior after thread breaking
MP4 - Thread cutting
Speed, position and tension
MP5 - Thread clamping
Starting angle
MP6 - Counters
Settings for program and bobbin counters
Edit
>
Machine parameters
.
69
Advertisement
Table of Contents
