Panasonic S-160PE1R5B Technical Data & Service Manual page 111

1-3. Operating the High-spec Wired Remote Controller (CZ-RTC5B)
[ ] START
How to set the external static pressure
1. Keep pressing the
simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the LCD display.
Maintenance func
0. ECONAVI info.
1. Outdoor unit error data
2. Service contact
3. RC setting mode
Sel. Page [
2. Press the or
you wish to see the next screen instantly, press the
or button.
Select "8. Detailed settings" on the LCD display and press the
button.
Maintenance func
5. Sensor info.
6. Servicing check
7. Simple settings
8. Detailed settings
Sel. Page [
The "Detailed settings" screen appears on the LCD display.
Select the "Unit no." by pressing the
for changes.
Detailed settings
Unit no. Code no.
3-1
Sel. Next
20:30 (THU)
, and buttons
20:30 (THU)
,
] Confirm
button to see beach menu. If
20:30 (THU)
] Confirm
or button
20:30 (THU)
Set data
10 0006
3. Select the "Code no." by pressing the
button.
Change the "Code no." to "5D" by pressing the
button (or keeping it pressed).
Detailed settings
Unit no.
3 1 -
Sel.
4. Select the "Set data" by pressing the
button.
Select one of the "Set data" among "0006", "0003" or "0001"
according to the desired external static pressure setting by
pressing the
(See Table 1-11-2-2-4 and Fig. 1-11-2-2-4.)
Then press the
Table 1-11-2-2-4 Setting the external static pressure
Indoor unit
180 200
External static pressure of the rated
air flow volume
150 Pa 180 Pa
100 Pa 120 Pa
60 Pa 75 Pa
5. Select the "Unit no." by pressing the
button and press the
The "Exit detailed settings and restart?"
(Detailed setting-end) screen appears on the LCD display.
Select "YES" and press the
Detailed settings
Unit no.
1-1
Sel.
1-11-2-2-9
or
20:30 (THU)
Code no. Set data
5D 0 0 1 0
Next
or
or button.
button.
Item code
224
0006
200 Pa
130 Pa 0003
75 Pa 0001
or
button.
button.
20:30 (THU)
Exit detailed settings
Code no. Set data
and restart?
10 0001
YES NO
Next
1
or
5D