Panasonic S-160PE1R5B Technical Data & Service Manual page 104

1
How to separate the indoor unit
1. Remove the wire cover.
(1) Loosen two screws.
Two screws
(2) Move to the left and remove the wire
cover through the round hole.
Move to the left.
2. Remove the fan cover unit.
(1) Loosen four screws.
Four screws
(2) Move the fan cover unit upward and
remove it through the round hole.
3. Remove the motor relay connector.
Remove the wire from the fixed mounting bracket.
4. Separate the fan motor unit and heat
exchanger unit.
(1) Loose the upper side three bolts and
remove the lower side three bolts.
Remove the wire cover.
Do not remove the upper side three bolts.
The motor unit may drop during work of
unit separation and can lead to personal
injury or death.
Fan cover unit
(2) Move upward and remove the fan motor
unit through the round hole.
Remove two motor relay connectors.
WARNING
Loosen the upper side three bolts.
Remove the lower side three bolts.
1-11-2-2-2
How to assemble the indoor unit
1. Attach the fan motor unit.
(1) Pass the bolts for the heat exchanger
unit through the round holes.
Mount the unit with three holes located
in the center of the upper side.
(2) Attach three bolts in the lower side and
then fasten three bolts in the upper side.
(Tightening torque : 2.45 ~ 3.4 N · m)
Fasten three bolts.
Attach three bolts.
(3) Attach the motor wire.
Attach two motor connectors.
(Connectors at each end should be
matched with the same color.)
Wire with the fixed mounting bracket.
2. Attach the fan cover unit and wire cover.
Attach the fan cover unit and wire cover in
reverse order of separating unit.