Analog I/O - Thermo Scientific 42iQ Instruction Manual

Thermo Scientific

Analog I/O

The Analog I/O screen allows for configuring the analog inputs/outputs.
This is only visible if selected in Settings>Configuration>Analog I/O.
Home Screen>Settings>Communications>Analog I/O
The Analog I/O screen contains the following information:
Analog In: Allows the user to view and calibrate voltage inputs from
●
external devices.
Analog Out (Voltage): Allows the user to view voltage outputs.
●
Analog Out (Current): Allows the user to view current (mA) outputs.
●
Analog Out Under/Over Range Enabled/Disabled: Allows the user to
●
select whether or not the analog outputs are allowed to exceed the
selected output range.
Analog Out Calibration: Allows the user to calibrate the analog out
●
voltage and current to account for varying loads attached to the
terminals.
Operation
Settings
42iQ Instruction Manual 3-97