Figure 7-38. Photo Reaction Chamber Cleaning, Hardware - Thermo Scientific 42iQ Instruction Manual

Thermo Scientific
Figure 7–38. Photo Reaction Chamber Cleaning, Hardware
6. Pull reaction chamber outwards.
Equipment Damage Some internal components can be damaged by small
amounts of static electricity. A properly grounded antistatic wrist strap
must be worn while handling an internal component.
7. To reinstall reaction chamber, follow previous steps in reverse, making
sure to back fill the cooler with dry air or nitrogen prior to installing
reaction chamber.
8. Reinstall the measurement bench. Refer to
44.
DMC PMT Cooler and Reaction Chamber Replacement
▲
Figure 7–37 and
42iQ Instruction Manual
Servicing
Figure 7–
7-35