Thermo Scientific
The Instrument Display contains the following information:
Title Bar:
●
Home button: When pressed, it brings you to the Home Screen.
●
Title Text: Displays instrument name when in the Home Screen.
●
Displays the chemical name, current concentration reading and
unit when in all other screens. When unit is pressed, it brings you
to the unit selection screen.
Gas Mode button: Displays current gas mode of the instrument.
●
When pressed, brings you to the Gas Mode selection screen.
Help button: When pressed, brings you to the help screens.
●
User Interface:
●
Calibration button: Allows the user to calibrate the instrument,
●
setup automatic calibrations, and view calibration data.
Data button: Allows the user to view, graph, stream, and analyze
●
data.
Settings button: Shows real-time status and alarms, also predictive
●
diagnostics and maintenance history. Contains controls for
operating the instrument, communications, and sets instrument
options.
Concentration: When in single mode, displays NO, NO
●
concentrations in big, bold characters, depending on operating
mode. When in dual or auto mode, displays either high range or
low range values based on the range setting.
Status Bar:
●
Back button: When pressed, it displays the previous screen.
●
Access Levels button: Allows the user to set security access levels, and
●
allows/restricts access to functionality depending on the selected
access level.
Health Check button: Brings the user to the Health Check screen.
●
Favorites button: Allows user-selectable favorite buttons. To add to
●
the favorites screen, user presses the desired screen button for 2
seconds. The user will be directed to the favorites screen where the
user chooses the button position. To remove a favorite button from
the favorites screen, press and hold button for 2 seconds.
Clock: Displays current date and time.
●
Operation
Instrument Display
, and NO
2
x
42iQ Instruction Manual
3-3