Service Menu; Service Menu Options - Vertiv Liebert iCOM DP400/500 Installer/User Manual

Total Run Hours
Opens the RUN HOURS panel. See
EconoPhase
Opens the ECONOPHASE - PUMP MODE panel.
About
Opens the ABOUT panel. See
Turn Unit On/Off
Depending on unit's status, open the TURN UNIT ON or TURN UNIT OFF dialog. See
Management Unit

1.8 Service Menu

The service menu lets you view and edit setpoints and perform many other functions.

1.8.1 Service Menu Options

Setpoints
Opens the SETPOINTS panel. See
Diagnostic/Service
Opens the Diagnostic/Service menu:
• Diagnostics: See
• EconoPhase View: Opens the ECONOPHASE - PUMP MODE panel.
• Technical Support: Contact information for the cooling unit and iCOM display.
Alarm/Event Setup
Opens the ALARMS & EVENTS panel. See
BMS & Teamwork
Opens the BMS & Teamwork menu:
• U2U Setup—See
• Teamwork/Standby—See
• BMS Setup—See
Scheduler
Opens the SCHEDULER panel. See
1 Getting Started with iCOM™
Managing Run Hours for a Component
About iCOM Version
on page 7, or Powering Off the Thermal Management Unit
Editing Setpoints for the Cooling Unit
Performing Diagnostics
Managing Events: Alarms, Warnings and Messages
Configuring U2U Network Settings
Teamwork, Standby and Rotation for Cooling Units
BMS and IntelliSlot Settings
Scheduling Condenser and Cooling Unit Tasks
on page 17.
on the previous page.
on page 8.
on page 19.
on page 95.
on page 59.
on page 79.
Powering On the Thermal
on page 43.
on page 63.
on page 31.
11