About Icom Version; Accessing The User, Service. And Advanced Menus; User Menu; User Menu Options - Vertiv Liebert iCOM DP400/500 Installer/User Manual

1.5 About iCOM Version

The version, build, and other firmware information for the iCOM display board may be helpful when servicing or
troubleshooting. To locate the firmware version of the iCOM control board, see
page 89.
• Touch

1.6 Accessing the User, Service. and Advanced Menus

iCOM operating functions that monitor and control a cooling unit are accessed via the User and Service menus.
NOTE: You must be logged in to access the menu options. See
on page 6.
1. To access a menu, touch the icon for the menu you want,
Control Header
the menu content that will be displayed.
2. Touch the menu icon,

1.7 User Menu

The user menu lets you view system and unit statuses and edit some setpoints.

1.7.1 User menu options

Setpoints
Opens the SETPOINTS panel. See
Active Alarms
Opens the ALARMS panel. See
Event Log
Opens the EVENT LOG panel. See
Sensor Data
Opens the SENSOR DATA panel. See
Display Options
Opens the Display Options menu:
• Customize Layout: See
• Custom Labels: See
• Date & Time: See
10
, then > About. The ABOUT panel opens.
on page 6. The orange bar appears below the menu name when selected indicating that this is
. The menu opens.
Viewing and Editing Setpoints for the Cooling Unit
Viewing Unit Alarms
Viewing the Event Log
Viewing Sensor Data
Customizing Main Display Views
Customizing Parameter and Field Labels
Setting the Date and Time
Updating iCOM Control Board Firmware
Powering On iCOM and Logging In/Unlocking Controls
, or
on page 14.
on page 16.
on page 17.
on page 104.
on page 106.
on the previous page.
on
, in the control header, see
on page 13.
Vertiv™ | Liebert® iCOM™ Installer/User Guide