Customizing Your Icom Display; Setting General Display Properties; Unit Display Options - Vertiv Liebert iCOM DP400/500 Installer/User Manual

12 CUSTOMIZING YOUR iCOM DISPLAY

NOTE: Your Liebert® DSE™ Packaged Solution does not offer humidification or dehumidification functions. Please
disregard those settings/fields when mentioned in this guide or displayed on the iCOM controller.

12.1 Setting General Display Properties

NOTE: You must be logged in to adjust the settings. See
page 6.
1. Touch
The DISPLAY PROPERTIES panel opens.
2. Touch a value to select the setting from the drop-down list
3. Touch Save to save the property settings.
• Touch Cancel to discard changes.

12.1.1 Unit Display Options

Alarm Buzzer Pattern
Selects or disables the audible alarm notification. See
Allow System On/Off
Enables/disables powering on/off the entire system of networked units from the iCOM display.
Backlight Brightness
Selects the brightness of the display back light.
Inactivity Timer
Time to elapse before display locks and dims.
Language
Selects the display language.
LED Brightness
Percentage brightness of the display.
Measurement System
Selects the units of measurement. Options are:
• Imperial (°F)
• Metric (°C)
12 Customizing Your iCOM Display
, then > Display Options > Display Properties.
Powering On iCOM and Logging In/Unlocking Controls
Enabling the Audible Alarm Notification
on
on page 52.
103