Purchasing A Spare Disk Drive; Does The Appliance Automatically Start After A Power Outage - Overland Storage REO Series Setup Manual
Disk-based backup-and recovery appliance with protection os software
Hide thumbs
Also See for REO Series:
- Quick start manual (5 pages) ,
- Remove & replace instructions (4 pages)
Table of Contents
Advertisement
Overland Storage REO 4000™ with Protection OS™ Software
Purchasing a Spare Disk Drive
1
2
Does the Appliance Automatically Start After a Power
Outage?
134
Basic Troubleshooting
If the process fails, an error message appears and the disk remains in
the FREE DRIVE POOL section. You must replace the applicable disk
with a good disk. For more information, see
Drive. If the REO Appliance continues to report a problem after you
replace the disk, contact Overland Storage Technical Support (for
more information, see
Important:
Make sure that you only remove and replace the disk that is
not functioning correctly (for example, the disk that is identified as
FAILED).
Note the serial number of your REO Appliance, which is located on the
exterior of the appliance.
Contact your local reseller or contact Customer Support at Overland.
For contact information, see
If the facility in which your REO Appliance is installed experiences an
interruption in power, the appliance will automatically run through the
power-up sequence when power is restored.
Customer Support
on page 139).
Customer Support
Purchasing a Spare Disk
on page 139.
Advertisement
Table of Contents
