Purchasing A Spare Disk Drive - Overland Storage REO 1000 Setup Manual

!
!
Important:

Purchasing a Spare Disk Drive

1 Note the serial number of your REO, which is located on the exterior of
the appliance.
2 Contact your local reseller or contact Customer Support at Overland.
For contact information, see
If the process succeeds, the disk returns to the volume, the Status is
OK, and REMOVE buttons become available for the disks. If the
Status is OK, you can resume normal operations with the REO. If you
want to ensure the integrity of the volume and the redundancy of the
data, click Verify.
If the process fails, an error message appears and the disk remains in
the FREE DRIVE POOL section. You must replace the applicable disk
with a good disk. For more information, see
Drive. If the REO continues to report a problem after you replace the
disk, contact Overland Storage Technical Support (for more
information, see Customer Support
Make sure that you only remove and replace the disk that is
not functioning correctly (for example, the disk that is identified as
NOT PRESENT).
Purchasing a Spare Disk
on page 113).
Customer Support on page 113.
Purchasing a Spare Disk Drive
Setup Guide
!
107