Advertisement
Tools Required
A Phillips screwdriver is needed, and a PC with an Internet connection may also be required.
Step 1: Checking Firmware
A) Verify the firmware version in the printer:
Press the TEST Button on the Control Panel.
Using the DOWN Button, scroll to PRINT
CONFIGURATION and press TEST.
B) Examine the Application Version printed on
the Configuration Label and proceed
accordingly:
If 14.09 (or greater), go to Step 2; or,
•
If 14.08 (or less), go to ftp.datamax-
•
oneil.com and download a new version.
Follow the "Updating Firmware"
instructions in the Operator's Manual and
install the update.
Step 2: Preparing the Printer
Always wear a wrist strap and follow ESD prevention measures when
handling circuit card assemblies.
CAUTION
A) Turn OFF the Power Switch and unplug the
power cord from the AC Receptacle.
READY
WED 09:32A 23APR2008
READY
PAUSE
FEED CANCEL
MENU
CONFIGURATION
THU 09:09 AM 24APR2008
PRINTER KEY:
4210-MG10-071010-027
APPLICATION VERSION:
83-2625-10H 10.07 07/24/2007
BOOT LOADER:
83-2627-10G 10.05 06/15/2007
UNLOCKED:
CG TIMES
FPGA:
MA05
iPH:
32-56777
Configuration Label
3
Control Panel
STOP
ERROR
TEST
Application Version
FORMAT ATTRIBUTES:l
XOR
LABEL ROTATION:
DISABLED
IMAGING MODE:
MULTIPLE LABEL
PAUSE MODE:
DISABLED
PEEL MODE:
DISABLED
SECURITY:
DISABLED
UNITS OF MEASURE:
IMPERIAL
INPUT MODE:
DPL
Power Switch
AC Receptacle
Advertisement
