Table of Contents
Advertisement
AppendixB
Maintenance, Shipping, and
I nstallation Procedures
Maintenance
No preventive maintenance on a scheduled basis is required.
Shipping and Installation
Packing and unpacking the printer involves simple procedures explained below. If
you feel that a more detailed explanation of the set up procedure is needed, you can
reference the Setup Procedure for Printers PR U706X & PR U707X manual, Order
No.CY03.
Unpacking ihe Unii
1.
Remove the printer from its protective package. SA VE the package in case you
need to move the printer at a later date and store the protective material that
comes with the printer in this package.
2. Remove the strip of
tape
located around the middle sides of the printer. Removing
this tape will allow you to lift the printer cover.
3. Lift the printer cover up and away from you. The internal mechanics of the
printer will be covered with protective material.
4. Remove this protective material from the internal mechanics and SA VE it in
the protective package for future use.
5. Remove the cartridge ribbon from its plastic bag.
6. Follow the steps in Section 3 for the Ribbon Changing procedure to load the
ribbon.
7. Close the cover.
Maintenance, Shipping, and
Installation Procedures
B-1
CY93-01
Advertisement
Table of Contents
