Table of Contents
Advertisement
Chapter 6
Temperature-Sensor-Simulation Thermoelectromotive-Force and Resistance Sourcing
6.1
Selecting Thermocouples and RTDs
When using thermocouple ranges, do not apply external voltage or current. Also, do not
connect to charged capacitive loads. Doing so may damage the voltage divider inside the
2560A.
French
Avec des gammes de thermocouples, ne pas alimenter en tension externe, ni courant. En
outre, ne connectez pas à une charge capacitive chargée. Cela pourrait endommager le
diviseur de tension à l'intérieur du 2560A.
Procedure
1.
Turn the RANGE dial to select TEMP.
The TEMP indicator illuminates, and the TEMPERATURE dial is enabled.
2.
Turn the TEMPERATURE dial to select a thermocouple (R, S, B, J, T, E, K, N, C, A, TC USER)
or RTC (Pt100, RTD USER) type.
•
The indicator for the selected type turns on.
•
The displayed unit will be °C.
Example: B
The B indicator
turns on.
IM 2560A-01EN
2. Select the thermocouple or RTD type.
The indicator for the selected type turns on.
TEMPERATURE dial
CAUTION
ATTENTION
1. Select TEMP.
The TEMP indicator turns on.
RANGE dial
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
App
Index
6-1
Advertisement
Table of Contents
