Connecting To The Ethernet Interface - YOKOGAWA 2560A User Manual

10.2 Connecting to the Ethernet Interface

Connection Method
Connect a UTP (Unshielded Twisted-Pair) or STP (Shielded Twisted-Pair) cable that is connected to a
hub or other network device to the Ethernet port on the 2560A rear panel.
Ethernet port
Notes on Connection
• To connect the 2560A to a PC through a hub or router, use straight cables. To directly connect
the 2560A to a PC (one-to-one connection), use a crossover cable.
• Use a network cable that supports the data rate of your network.
10-2
Hub or router that supports 100BASE-TX/10BASE-T
UTP or STP cable
(straight cable)
2560A
RJ-45 modular jack
PC
Network card
IM 2560A-01EN