Table of Contents
Advertisement
7.3
Sweep Output
Procedure
Setting the Sweep Time
1.
Turn the RANGE dial to select SETUP.
The SETUP menu appears.
2.
Turn a main setting dial to select SWEEP.
The deviation display shows the current sweep time.
3.
Turn the deviation dials to set the sweep time (seconds) to 8, 16, 32, or 64.
•
•
4.
Flip the PRESET switch down.
The setting is confirmed. All the PRESET indicators turn off.
7-4
1. Select SETUP.
The SETUP indicator turns on.
RANGE dial
When you change the setting, all PRESET indicators turn on.
If you decide not to change the setting, step 4 is not necessary.
Main setting dials (use any)
2. Select SWEEP.
Deviation dials (either)
3. Select the sweep time.
PRESET indicator
PRESET switch
4. Confirm the settings.
IM 2560A-01EN
Advertisement
Table of Contents
