Assembling The Appliance - Gastroback Design Multi Juicer Digital - Smoothie Operating Instructions Manual

ASSEMBLING THE APPLIANCE

Making Juice
A
the plug into the power point.
ATTENTION:
Ensure the stainless steel filter basket is clean before assembling. Any
dehumidified left over food on the basket will block the fine mesh holes. If necessary
remove excess fibre build up (from fruit or vegetables) according to the instructions ´Care
and Cleaning`.
B
C
Step1:
Place the filter bowl surround on the motor block. Locate the
filter bowl surround so that the spout fits through the hole on
the front of the motor base (picture A).
Step2:
WARNING: Handle the units with care and do not use
any force. Pay attention to the sharp blades on the stainless
steel micro mesh filter and the feed chute to avoid injury.
Always completely assemble your juicer before you plug
Align the arrows on the stainless steel filter basket with the
arrows on the motor drive coupling and push down until it
clicks into place. Ensure the stainless steel filter basket is fit-
ted securely inside the integrated pulp container and onto
the motor base (picture B).
Step 3:
Place the juicer cover over the stainless steel filter on top
of the filter bowl surround (picture C). The feed chute has
to be positioned in the middle of the filter basket and the
pulp spouting of the cover has to face away from the inter-
locking safety arm.
59