A
B
C
with both hands and lift it (picture D).
Step 6:
E
stainless steel filter basket (see picture).
If you worked with the Smoothie Attachment please follow these instructions:
Step 2:
Remove the pulp container by tilting the pulp container
slightly to the right and unlatch it from under the juicer cover
and the container support extending from under the motor
base (picture A).
Step 3:
Use the grip handle located on the safety locking arm to lift
the locking arm from the juicer cover and lower down out
of position (picture B).
D
WARNING:
The stainless steel filter basket contains
small sharp blades to cut and process fruit and vegetables.
Do not touch blades when handling the filter basket.
To remove the stainless steel filter basket from the filter bowl
surround, insert fingers under the grooves market 'LIFT BAS-
KET' and lift the filter basket up. For easy cleaning, it is
recommended to remove the filter basket over the sink.
ATTENTION:
There are sharp blades on the bottom of the
Step 4:
Lift the juicer cover off the jui-
cer (picture C).
Step 5:
Remove the filter bowl sur-
round with the stainless steel
filter basket still in place. To
remove the filter bowl grab it
67
Need help?
Do you have a question about the Design Multi Juicer Digital - Smoothie and is the answer not in the manual?
Questions and answers