Marking Of Display - Gastroback Design Multi Juicer Digital - Smoothie Operating Instructions Manual

Fruit / Vegetables
Plums (stone removed)
Melons (peeled)
Tomatoes
Watermelon (peeled)

MARKING OF DISPLAY

Speed Marking
Speed 1 Soft Fruit
Speed 2 Soft Fruit, Citrus
Speed 3 Citrus
Speed 4 Pineapple, Apple
Speed 5 Pineapple, Apple, Hard Veg
Step 4:
Press the 'On/Off' switch on the control panel to 'On'. The juicer will start to operate at
the selected speed. The speed can be changed at any time during the juicing process
by adjusting the variable speed control dial.
WARNING: The feed chute is extra-large! Never put fingers, wooden spoons or
other foreign substances (such as hair, clothing, brushes, cloth) into the feed chute. Never
use fingers to push food down the feed chute or to clear the feed chute. Always use the
food pusher provided. With the motor running, place food into the feed chute and use
the food pusher to gently guide food down. To extract the maximum amount of juice,
always push the food pusher down slowly.
Note:
The Juicer will automatically stop operating if the motor is stalled for more than 10
seconds. This is a safety feature. Either too much food is being processed at one time
or the pieces are not small enough. Try trimming food, cutting food into smaller pieces
of even size and/or processing a smaller amount per batch. To continue juicing, reset
the Design Multi Juicer Digital by pressing the 'On/Off' switch on the control panel to
'Off', then turn the appliance back on by pressing the 'On/Off' switch to 'On'.
Step 5:
As fruit and vegetables are processed, juice will flow into the juice jug and the separa-
ted pulp will accumulate in the pulp container.
Speed
2
2
1
1
65