Gastroback Design Multi Juicer Digital - Smoothie Operating Instructions Manual page 60

D
E
F
Step 7:
Place the juice jug provided under the spout on the right-hand side of the appliance. The
juice jug lid can be used to avoid any splatter.
Alternatively you can fit the custom-designed juice nozzle over the juice
G
spout and place a glass underneath. The juice nozzle will prevent splat-
ter, ensuring mess free juicing (picture G).
60
Step 4:
Raise the safety locking arm straight up and lock into the
two grooves on either side of the juicer cover. The safety
locking arm should now be in a vertical position and locked
into place on top of the juicer cover (picture D).
Important:
If the safety locking arm is not in the right posi-
tion the motor will not start moving and the display shows
"Lockbar".
Step 5:
Slide the food pusher down the feed chute by aligning the
groove of the food pusher with the small protrusion on the
inside of the top of the feed chute. Continue to slide the
food pusher down the feed chute (picture E)
Step 6:
Place the pulp container into position by tilting the motor
base slightly to the right. Insert the container under the jui-
cer cover on the left-hand side ensuring it is supported by
the container support extending from under the motor base
(picture F).
Note:
Pulp can then be used in other dishes, or as compost for
the garden or discarded.