1-2I Blowers; 1-2J Power Strips; 1-2K Sensors; 1-2L Switches - MaxFlight FS-VC Manual

1-2I Blowers

1. 3.5" blower for the projector. 115VAC
2. 2- 4.5" blowers mounted at rear of cockpit for ventilation. 115 VAC

1-2J Power Strips

Two located inside A-frame left side operator station. Two located under seats of cockpit
area.

1-2K Sensors

One left upper limit sensor, one right upper limit sensor, one lower limit (down) sensor, one
canopy sensor and one demo switch sensor. Brake release sensor.

1-2L Switches

There is one Occupant Safety Switch, e-stop between the seats in the cockpit. The crotch belt
switches are parallel to occupant e-stop. One E-Stop switch, which removes power box power,
located on front of cabinet by operator station.
1-2M Encoders
Signal powers the light diode that shines through the disc to a receiver diode.
1-2N Interface
Interface Control Boards are by Pro Motion and located behind left front cabinetry.
39