Suggested Postings And Manufacturer Specifications - MaxFlight FS-VC Manual

CHAPTER 3
Manufacturer's Specifications
3-1 Manufacturer's Specifications
Reference Standard:
ASTM-F24 Standards on Amusement Rides and Devices
MaxFlight, Corp., at the time of the initial design and prototype manufacture, determines
by calculations and testing the appropriateness of the functional design criteria. The visual esthetics
of the ride are also evaluated and together with the functional design criteria make up the
manufacturer's design specifications.
These design specifications are adhered to on all subsequently produced rides of the same
style. Occasionally, through field experience, it becomes necessary to specify a modification to the
original design specifications.
Actual modification to meet the change in design specifications can only be performed by
qualified personnel, following the directives of a MaxFlight, Corp. Service Bulletin, Service Kit, or
a MaxFlight, Corp. representative, where applicable.
Any modification performed on a MaxFlight, Corp. product outside the recommended
directives established by MaxFlight, Corp. as referenced above, constitutes an unauthorized
modification. MaxFlight, Corp. specifically disclaims any liability for loss associated with any
unauthorized alteration and/or modification to any of its products.
MaxFlight Corp. will not issue letters for the operation of rides which do not meet the
manufacturing specifications; this includes cases where the non-conforming modifications of an
aesthetic nature only.
In case where owner/operator desires to change paint scheme of cabin, prior written approval
from MaxFlight is required.
It is the responsibility of the individual inspector to thoroughly inspect the ride as deemed
necessary, based on his knowledge and field experience to determine that the ride meets the
manufacturers and/or is safe for operation.
Information for our rides, can be obtained by calling Tech Support at MaxFlight Corp. during
normal business hours 8:30AM to 5PM eastern standard time, at 1-732-281-2007 Ext 235. Tech
information, safety bulletins and manuals can also be viewed on our website at
www.maxflight.com
–
1. F770 Practice for Operation Procedures for Amusement Rides and Devices
2. F853 Maintenance Procedures for Amusement Rides and Devices
3. F893 Inspection of Amusement Rides and Devices
4. F1159 Design and Manufacture of Amusement Rides and devices
5. NEC 1996 National Electrical Code
SUGGESTED POSTINGS and
26