MaxFlight FS-VC Manual page 13

The queue line must be kept orderly. The patrons must remain behind the established
barriers while waiting their turn to fly. The queue line should also be used to familiarize patrons
with the safe operation of their flight simulator as well as the game selections.
1-3D Canopy Operation
When opening the canopy, unlatch the safety cable then the top latch, rotate the locking
knob, open the latch and allow the canopy to rise under its own power. DO NOT force the canopy
up, this may damage the lift struts.
1.
Ensure that the cockpit has completed movement prior to continuing with any other procedures.
2. Ensure that during any time the electric power is enabled, people stay clear of the simulator to prevent
injury due to the possible movement of the simulator.
3. Ensure that operating personnel do not operate the simulator with any of the cover plates removed.
4. Ensure that only authorized personnel open the electrical power box for any reason.
5. Ensure that patrons pass the age, height and weight requirements to operate/ride the simulator safely.
CHAPTER 2 – OPERATION
2-1 Description of Motion During Operation
There are three basic axes of motion that the simulator travels on, Pitch, Roll and vertical
lift into the game position. When used in accordance with the procedures outlined in this chapter,
the FS-VC DUAL SYSTEM Flight Simulator/Roller Coaster will provide hours of trouble free
operation.
2-1A Roll Axis
The roll motor is a 3HP 208/220/380/415/440/480 3 phase VAC drive motor controlled by
a frequency drive inverter.
counterclockwise direction, when facing the machine. The maximum velocity the roll axis will
produce is 110 degrees per second.
2-1B Pitch Axis
The pitch motor is a 5 HP 208/220/380/415/440/480 3 phase VAC drive motor, controlled
by a frequency drive inverter. The pitch axis will rotate the cockpit in either upwards or downwards
direction standing in front of the machine. The maximum velocity the pitch axis will produce is 90
degrees per second.
The roll axis will rotate the cockpit in either a clockwise or
13