Recommendations; Tools Needed; Preparing For Installation - Raven SmarTrax Installation Manual
Gps steering control system
Hide thumbs
Also See for SmarTrax:
- Calibration and operation manual (156 pages) ,
- Operation manual (73 pages) ,
- Installation manual (59 pages)
Table of Contents
Advertisement
Chapter 2
Recommendations
Raven Industries recommends the following best practices when installing the Steering Control system:
•
Use part numbers to identify the parts.
•
Do not remove the plastic wrap from a part until it is necessary for installation.
Tools Needed
The following tools may be needed for installation of the Steering Control system:
•
Screwdrivers of various sizes
•
SAE standard-sized wrenches
•
Allen wrenches
•
Side cutters
•
Pliers
Preparing for Installation
Leave the machine turned off for the duration of the installation process. During the installation process, follow
good safety practices. Be sure to carefully read the instructions in this manual as you complete the installation
process.
6
Challenger MT 7XXC and MT 8XXC Series SmarTrax Installation Manual
Advertisement
Table of Contents
