Applying The Measuring Voltage; Parameterizing With Powerconfig - Siemens SENTRON 7KT PAC1600 Equipment Manual

Commissioning

6.2 Applying the measuring voltage

6.2 Applying the measuring voltage
Risk of death due to excessively high voltage!
Death, serious injury, or property damage may result if the nominal voltage ranges are
exceeded.
Always observe the limits specified in the technical data and on the type plate.
The device is supplied with power via the measuring voltage.
Please consult chapter Technical data (Page 99) or the type plate for the type and level of the
possible supply voltage.
You can find more information in chapter Connection (Page 71).
6.3

Parameterizing with powerconfig

You can download the powerconfig configuration software from the Industry Online Support
website via the link (https://support.industry.siemens.com/cs/ww/en/view/63452759).
Information on how to use powerconfig can be found in the Online Help of the configuration
software or by contacting Technical Support.
You launch the Online Help in powerconfig by pressing the F1 key.
Prerequisite (RS 485 devices only)
You can only connect RS 485 devices to powerconfig. To connect RS 485 devices to
powerconfig, an RS 485 interface and a supply voltage must be available.
In order to configure the PAC1600 measuring device, you must connect the measuring
voltages and set up communication with the device.
Establishing connection to the device
To establish a connection to the PAC1600, proceed as follows:
1. Connect the PAC1600 device to the PC.
2. Open the powerconfig configuration software.
3. Click the Search for accessible devices button on the toolbar or press the F11 key.
The "Search for accessible devices" window is displayed.
4. In the "Search for accessible devices" window, click the Serial tab if you want to access the
device via an RS 485 interface.
The "Serial" view appears.
80
DANGER
7KT16 energy meter
Equipment Manual, 09/2020, 2514284147-04