Programmable Ac Input; Settable Values For Parameters P2.01, P3.01, P4.01 - Siemens SENTRON 7KT PAC1600 Equipment Manual

Description
3.4 Three-phase devices 80 A
P5-01
P5-02
3.4.4.6

Programmable AC input

Three-phase devices have a programmable AC input.
This input is deactivated by default. Set parameter P5.01 to select the required function.
You can use the input as follows:
• For 2 different tariffs (T1 and T2) with independent energy meters
• For resetting partial counters, hour counters and demand values
• For activating hour counters
3.4.4.7

Settable values for parameters P2.01, P3.01, P4.01

Setup
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
40
Defines the operating hours counter:
• OFF = Hour counter deactivated. Nothing appears on the display.
• ON = The hour counter is incremented for as long as the energy meter measures
energy.
• THR1 = The hour counter is incremented for as long as the limit threshold
defined by the parameters (P2-01 ... P2-06) is active.
• THR2 = The hour counter is incremented for as long as the limit threshold
defined by the parameters (P3-01 ... P3-06) is active.
• INP = The hour counter is incremented for as long as the programmable input
is activated. Parameter P4.01 must be set to ON.
Activates the calculation and display of power demand values and max. demand
values.
Unit of meas- Measured value
urement
kW Active power
kW Total active power
kW L1 Active power L1
kW L2 Active power L2
kW L3 Active power L3
kvar Reactive power
kvar Reactive power
kvar L1 Reactive power L1
kvar L2 Reactive power L2
kvar L3 Reactive power L3
kVA Apparent power
kVA Total apparent power
kvar L1 Apparent power L1
kvar L2 Apparent power L2
kvar L3 Apparent power L3
V L-n Phase voltage
V L1 Phase voltage L1N
1)
1)
1)
1)
Equipment Manual, 09/2020, 2514284147-04
7KT16 energy meter