Commissioning
6.2 Applying the measuring voltage
6.2
Applying the measuring voltage
The device is supplied with power via the measuring voltage.
Please consult the technical data or the type plate for the type and level of the possible
supply voltage.
Note chapter Connections (Page 41)
Do not apply voltage in excess of the rated voltage limit.
Failure to observe this notice may result in death, serious injury, or property damage.
The limits given in the technical data and on the type plate must not be exceeded even at
startup or when testing the device.
6.3
Parameterizing the device
6.3.1
Parameterizing with SENTRON powerconfig
You can download the SENTRON powerconfig configuration software from the Industry
Online Support Website
(https://support.industry.siemens.com/cs/document/63452759/update-version-powerconfig-
v3-7?dti=0&lc=en-WW).
Information and notes on how to use SENTRON powerconfig can be found in the Online
Help of the configuration software or by contacting Technical Support.
You launch the Online Help in SENTRON powerconfig by pressing the "F1" key.
In order to be able to configure the PAC2200 measuring device, measuring voltage must be
connected and communication to the device established.
58
WARNING
PAC2200
Manual, 05/2018, L1V30415167B-02