Hour Counter; Limit Threshold Status Display (Limx) - Siemens SENTRON 7KT PAC1600 Equipment Manual

Description
3.5 Three-phase devices 5 A
3.5.4.4

Hour counter

When the hour counter is activated, the devices display the hour counter page in the
following format:
①
②
③
The energy meter has one total hour counter and four partial hour counters. You can reset
and activate both hour counters using various sources. You can find more information on this
in chapter Parameter table (Page 54).
3.5.4.5

Limit threshold status display (LIMx)

If limit thresholds are activated, the devices display the page with the corresponding status
and the format shown in the diagram below:
①
②
• If the limit threshold is activated, the word ON flashes.
• If the function is deactivated, the word OFF is displayed continuously.
• If no limit threshold is programmed, dashes are displayed.
You can find more information on limit thresholds in chapter Parameter table (Page 54).
52
Hours
Seconds
Minutes
Limit thresholds deactivated
Limit thresholds activated
7KT16 energy meter
Equipment Manual, 09/2020, 2514284147-04