Powerconfig - Siemens SENTRON 7KT PAC1600 Equipment Manual

3.6.2

powerconfig

Note
Relevant only for devices with an RS 485 interface.
The powerconfig software is the combined commissioning and service tool for
communication-capable measuring devices and circuit breakers from the SENTRON family.
The PC-based tool facilitates parameterization of the devices by saving a great deal of time, in
particular when several devices have to be set up.
You can use powerconfig to parameterize and operate the measuring devices via various
communication interfaces, and to document and monitor measured values.
powerconfig functions
• The software combines the following functions:
– Parameterization
– Documentation
– Operation
– Monitoring
• User-friendly documentation of settings and measured values
• Clear presentation of the available parameters including plausibility testing of the input
values
• Display of the available device statuses and measured values in standardized views
• Project-oriented storage of device data
• Consistent operation and usability
• Support for various communications interfaces (Modbus RTU, Modbus TCP, PROFIBUS,
PROFINET)
• Updating of device firmware (device-dependent)
• Loading of language packs (device-dependent)
Note
You launch the Online Help in SENTRON powerconfig by pressing the F1 key.
7KT16 energy meter
Equipment Manual, 09/2020, 2514284147-04
Description
3.6 Supporting software
67