Parameterization; Devices With Rs 485 Interface; Devices With M-Bus Interface; Setup Parameter Table For Devices With Rs 485 And M-Bus Interface - Siemens SENTRON 7KT PAC1600 Equipment Manual

3.4.4

Parameterization

3.4.4.1

Devices with RS 485 interface

You can transmit the measured values of the energy meters via the RS 485 interface.
The device functions as a standard Modbus slave.
The Modbus register table is provided in the appendix. You can find more information in
chapter Modbus address table for three-phase devices 80 A with Modbus interface (Page 91).
3.4.4.2

Devices with M-Bus interface

Devices with an M-Bus interface support 2 addressing paths:
• Primary address from 1 to 250
• Secondary address from 00000000 to 99999999
Baud rates from 300 to 38400 bps.
3.4.4.3

Setup parameter table for devices with RS 485 and M-Bus interface

For all variants
Code
P1-01
P1-02
P2-01
P2-02
P2-03
P3-01
P3-02
P3-03
P4-01
P4-02
P4-03
P5-01
7KT16 energy meter
Equipment Manual, 09/2020, 2514284147-04
Description
Password
Activate energy displays (export)
Measured variable for hour counter 1
limit
Limit 1 ON
Limit 1 OFF
Measured variable for hour counter 2
limit
Limit 2 ON
Limit 2 OFF
Measured variable for hour counter 3
limit
Limit 3 ON
Limit 3 OFF
Function of input 1
3.4 Three-phase devices 80 A
Default Range
0000 0000 ... 9999
OFF
• OFF
• ON
01 kW See Settable values for parameters
P2.01, P3.01, P4.01 (Page 40).
10.00 −9999.99 ... 9999.99
5.00 −9999.99 ... 9999.99
01 kW See Settable values for parameters
P2.01, P3.01, P4.01 (Page 40).
10.00 −9999.99 ... 9999.99
5.00 −9999.99 ... 9999.99
01 kW See Settable values for parameters
P2.01, P3.01, P4.01 (Page 40).
10.00 −9999.99 ... 9999.99
5.00 −9999.99 ... 9999.99
OFF
• OFF = Deactivated
• ON = Activated
• TAR = Tariff selection
• CLr Part = Clear partial energy meter
• CLr Hr = Clear hour counter
• CLr dE = Clear max. demand values
Description
33