Switch Specifications - CKD RCS2 Series Instruction Manual

1.2.2

Switch specifications

 Reed 2-wire (T switch)
Descriptions
Applications
Load voltage 12/24 VDC
Load current 5 to 50 mA
Internal voltage drop
Indicator lamp Red LED (Lit when ON)
Leakage current
Lead wire length
Shock resistance
Insulation resistance
Withstand voltage
Ambient temperature
Degree of protection
Contact protection
(Note 2)
circuit
Note1: Internal resistance 0.5Ω or less.
Note2: Refer to Intro Page 14 for contact protective measures.
 Proximity 2-wire (T switch)
Descriptions
For programmable controller,
Applications
Output method
Power supply voltage
Internal voltage drop
Indicator lamp
1 mA or less with 100 VAC.
Leakage current
2 mA or less with 200 VAC.
Lead wire length
(Oil-resistant vinyl cabtyre
cable 2-conductor, 0.3 mm
Shock resistance
Insulation resistance
No failure after 1 minute of
Withstand voltage
1,500 VAC applications.
Ambient temperature
Degree of protection
Note 1: The above maximum load current is 20 mA at 25°C. The current is lower than 20 Ma if the operating ambient temperature around the
switch is higher than 25°C (5 mA to 10 mA at 60°C).
T0H/T0V
For programmable controller,
For programmable
controller, relay
110 VAC 5/12/24 VDC
7 to 20 mA 50 mA or less
3 V or less
1m、3m、5m
(Oil-resistant vinyl cabtyre cable 2-conductor, 0.3 mm
20 MΩ and over with 500 VDC megger
No failure after 1 minute of 1,000 VAC applications.
IEC standard IP 67, JIS C 0920 (water-tight), oil-resistant
None
T1H/T1V
relay solenoid valve
85 to 265 VAC
5 to 100 mA
10% or less of load
voltage
Red LED(Lit when ON)
1m、3m、5m
1m、3m、5m
(Oil-resistant vinyl
cabtyre cable
2
)
2-conductor, 0.2 mm
20 MΩ and over
≧100 MΩ at 500
VDC(megger)
VDC(megger)
IEC standard IP 67, JIS C 0920 (water-tight), oil-resistant
Reed 2-wire
T5H/T5V
relay, IC circuit
(without indicator),
serial connection
100/110 VAC
20 mA or less
(Note 1)
0.1 V or less
Without indicator lamp
0 mA
2
)
2
294 m/s
-10(14°F) to +60°C(140°F)
Proximity 2-wire
T2JH/T2JV
T2H/T2V
(Off-delay)
Dedicated for programmable controller
10 to 30 VDC
5 to 20 mA
(Oil-resistant vinyl cabtyre cable
2-conductor, 0.3 mm
2
)
2
980 m/s
≧100 MΩ at 500 VDC(megger)
with 500
No failure after 1 minute of 1,000 VAC applications.
-10(14°F) to +60°C(140°F)
5
T8H/T8V
For programmable controller, relay
12/24 VDC 110 VAC
5 to 50 mA 7 to 20 mA
3 V or less
Red LED (Lit when ON)
1m、3m、5m
(Oil-resistant vinyl cabtyre cable 2-conductor, 0.3 mm
100 MΩ and over with 500 VDC megger
No failure after 1 minute of 1,500 VAC applications.
Yes
T2YH/T2YV
(2-color display)
(Note 1)
4 V or less
Red/green LED(Lit when ON)
1mAor less
1m、3m、5m
2
)
2-conductor, 0.2 mm
220 VAC
7 to 10 mA
2
)
T2WH/T2WV
(2-color display)
24 VDC ±10%
1m、3m、5m
(Oil-resistant vinyl
cabtyre cable
2
)
20 MΩ and over
with 500
VDC(megger)