CKD RCS2 Series Instruction Manual page 10

 Proximity 3-wire (T switch)
Descriptions
Applications
Output method
Power supply voltage
Load voltage
Load current
With 24 VDC 10 mA
Current consumption
Internal voltage drop
Indicator lamp
Red LED (Lit when ON)
Leakage current
Lead wire length
(Oil-resistant vinyl cabtyre cable 3-conductor, 0.2 mm
Shock resistance
Insulation resistance
Withstand voltage
Ambient temperature
Degree of protection
 Proximity 2-wire (For AC magnetic field)(T switch)
Descriptions
Applications
Indicator lamp
Load voltage
Load current
Internal voltage drop
Leakage current
(Note1)
Output delay time
(ON/OFF delay)
Lead wire length
(Oil-resistant vinyl cabtyre cable 2-conductor, 0.5 mm
Insulation resistance
Withstand voltage
Shock resistance
Ambient temperature
Degree of protection
Note 1: Indicates the time from magnetic sensor detection of the piston magnet until switch output.
Note 2: As the switch for AC magnetic field (T2YD*) is for spot welding machine, it cannot be used with arc welding machine (DC).
T3PH/T3PV
T3H/T3V
(PNP output)
NPN output PNP output
100 mA or less
With 24 VDC 12 mA or
or less
Yellow LED (Lit when ON)
1m、3m、5m
20 MΩ and over with 500 VDC(megger)
No failure after 1 minute of 1,000 VAC applications.
IEC standard IP 67, JIS C 0920 (water-tight), oil-resistant
T2YD
1m、3m、5m
No failure after 1 minute of 1,000 VAC applications.
IEC standard IP 67, JIS C 0920 (water-tight), oil-resistant
Proximity 3-wire
T3YH/T3YV
(2-color display)
For programmable controller, relay
10 to 28 VDC
30 VDC or less
less
0.5 V or less
10 μA or less
1m、3m、5m
(Oil-resistant vinyl cabtyre cable
2
)
3-conductor, 0.3 mm
2
980 m/s
100 MΩ and over with 500
VDC(megger)
-10(14°F) to +60°C(140°F)
Proximity 2-wire
Dedicated for programmable controller
Red/green LED (Lit when ON)
24 VDC ±10%
5 to 20 mA
6 V or less
1.0 mA or less
30 to 60 mS
2
(flame resistance vinyl cabtire cord 2 conductor 0.5 mm
)
100 MΩ and over with 500 VDC(megger)
2
980 m/s
-10(14°F) to +60°C(140°F)
6
T3WH/T3WV
(2-color display)
NPN output
50 mA or less
10 Ma or less with 24 VDC
Red/green LED (Lit when ON)
1m、3m、5m
(Oil-resistant vinyl cabtyre cable
2
) 3-conductor, 0.2 mm
20 MΩ and over with 500
VDC(megger)
T2YDT
1m、3m、5m
2
)
2
) (option)