CKD RCS2 Series Instruction Manual page 11

 (Proximity 2-wire) (F switch)
Descriptions
Applications
Load voltage
Load current
Internal voltage drop
Indicator lamp
Leakage current
Lead wire length
Shock resistance
Insulation resistance
Withstand voltage
Ambient temperature
Degree of protection
Note 1: The above maximum load current is 20 mA at 25°C. The current is lower than 20 Ma if the operating ambient temperature around the
switch is higher than 25°C (5 mA to 10 mA at 60°C).
 (Proximity 3-wire) (F switch)
Descriptions
Applications
Output method
Power supply voltage
Load voltage
Load current
Current consumption
Internal voltage drop
Indicator lamp Yellow LED (Lit when ON)
Leakage current
Lead wire length
Shock resistance
Insulation resistance
Withstand voltage
Ambient temperature
Degree of protection
F2H/F2V
10 to 30 VDC
Yellow LED (Lit when ON)
1m、3m
No failure after 1 minute of 1,000 VAC applications.
IEC standard IP 67, JIS C 0920 (water-tight), oil-resistant
F3H/F3V
NPN output
10 to 28 VDC
0.5 V or less
(Oil-resistant vinyl cabtyre cable 3-conductor, 0.15 mm
No failure after 1 minute of 1,000 VAC applications.
IEC standard IP 67, JIS C 0920 (water-tight), oil-resistant
Proximity switch
F2S
Dedicated for programmable controller
(Note1)
5 to 20 mA
4 V or less
Yellow LED (Lit when ON)
1 mA or less
(Oil-resistant vinyl cabtyre cable 2-conductor, 0.15 mm
2
980 m/s
20 MΩ and over with 500 VDC(megger)
-10(14°F) to +60°C(140°F)
Proximity switch
F3S F3PH/F3PV
For programmable controller, relay
NPN output PNP output
4.5 to 28 VDC
30 VDC or less
50 mA or less
10 mA or less with 24 VDC
0.5 V or less 30 mA
Yellow LED
Yellow LED (Lit when ON)
(Lit when ON)
10 μA or less
1m、3m
2
980 m/s
20 MΩ and over with 500 VDC(megger)
-10(14°F) to +60°C(140°F)
7
F2YH/F2YV
24 VDC ±10%
Red/green LED (Lit when ON)
2
)
F3YH/F3YV
NPN output
10 to 28 VDC
0.5 V or less
Red/green LED (Lit when ON)
2
)