AudioCodes MediaPack Series Hardware Installation Manual page 58

CHAPTER 6 Hardware Maintenance
Figure 6-19: Handle and Release Latch on Power Supply Module (Example using AC Module)
c.
Place your other hand under the Power Supply module for support and then slide it
completely out of the chassis. Avoid touching the top of the module; it may be hot
from being in the chassis:
Figure 6-20: Removing Power Supply Module from Chassis (Example using AC Module)
2.
Install the new Power Supply module:
a. Grip the handle on the Power Supply module with one hand while supporting it
underneath with the other hand.
b. Orientate the Power Supply module as shown in the previous figure and align it with
the chassis slot from which you removed the faulty module.
c.
Gently insert the Power Supply module into the slot until it has engaged fully with the
chassis backplane and a "click" sound heard when the release latch of the module
locks it into the slot.
d. Connect the Power Supply module to the power source.
MP-1288 | Hardware Installation Manual
- 52 -